PURETEC RO270 REVERSE OSMOSIS WATER FILTER SYSTEM – REDUCES FLUORIDE, PFAS & HEAVY METALS, 0.0005 MICRON
- Reverse osmosis water filter — reduces fluoride, PFAS & heavy metals to 0.0005 micron
- On-demand filtered water with a stylish chrome faucet, no bottled water needed
- Simple under-sink install, includes 7L holding tank, backed by a 3-year warranty
Puretec RO270 Reverse Osmosis Water Filter System
Reverse osmosis is the gold standard when it comes to water filtration — forcing water through an ultra-fine membrane that rejects impurities down to approximately 0.0005 micron and flushes them straight out to drain. The Puretec RO270 brings this level of filtration straight to your kitchen, delivering pure, safe water on demand from a dedicated chrome faucet.
Filters What Other Systems Can't
This system reduces up to 98% of all dissolved impurities, including fluoride, heavy metals, salts, viruses, bacteria, cysts, nitrate, chlorine, taste, odour, and chemicals like PFAS. For the most thorough PFAS protection available, Puretec recommends pairing the RO270 with a FilterWall F Series whole house water filter as a first stage.
Healthier Water, Better Tasting
Beyond eliminating harmful contaminants, reverse osmosis filtration genuinely improves the taste and odour of your drinking water — no more relying on bottled water, which also means less plastic waste in your household.
No Bacteria Build-Up, No Guesswork
An integrated flushing system helps prevent bacteria build-up within the membrane itself, so you're not just filtering contaminants out today — you're keeping the system clean for the long run.
Simple Installation, Included Faucet
Comes as a complete kit with a 7L holding tank and a stylish ¼-turn ceramic disc chrome faucet, giving you everything needed for a straightforward under-sink installation.
Specifications
- Model: RO270-LF
- Capacity: 270 litres per day
- Micron rating: 0.0005⁺ micron (nominal)
- Replacement cartridges: MC051 (Stage 1), CB951 (Stage 2), RET1812-75 (Stage 3)
- Min/max temperature: 0–30°C (protect from freezing)
- Min/max pressure: 300–870 kPa
- Connection: ½" BSP (15mm)
- Max inlet TDS: 2,000 mg/L
- Max hardness: 171 mg/L (10 grain)
- Tap hole: 13mm diameter
- Warranty: 3 years (1 year parts & labour, plus 2 years parts only)
| Install Location | Indoor |
|---|---|
| Filter Replacement Frequency | 12 Months |
| Connection Size | ½ inch |
| Filter Cover | No |
Please complete your information below to login.