📞 Call Us Now

PHILMAC ¾" (20MM) FOOT VALVE – FI BSP, PN16, AUSTRALIAN MADE

SKU
FV20P
Add to Compare
$32.95
  • ¾" (20mm) foot valve, keeps your pump primed on suction lines from dams, tanks & bores
  • PN16 rated, seals from 20 kPa, installs horizontally or vertically
  • Glass-reinforced nylon with 316 stainless steel spring, Australian made, 20-year warranty

Philmac ¾" (20mm) Foot Valve (FI BSP)

The Philmac ¾" (20mm) Foot Valve fits on the end of a pump suction line to stop water draining back, so your pump stays primed. It has a female BSP thread and is ideal for dams, tanks, bores and water transfer. Designed and manufactured right here in Australia.

Keeps Your Pump Primed
Fitted below the pump inlet, the foot valve holds water in the suction line so the pump doesn’t lose prime between uses.

Low Pressure Shut-Off, High Pressure Rating
The valve seals at pressures as low as 20 kPa (about 2m of head) and is rated to 1600 kPa static shut-off at 20°C.

Install It Horizontally or Vertically
It can be fitted in either orientation. Philmac recommends PTFE tape on the BSP thread for a positive seal.

Tough, Corrosion-Resistant Construction
The body is glass-reinforced nylon with a 316 stainless steel spring and a nitrile rubber seat and O-rings. It’s corrosion and UV resistant, and backed by a 20-year warranty.

Specifications

  • Size: ¾" (20mm)
  • Thread type: FI BSP (female)
  • Pressure rating: PN16 (1600 kPa static shut-off at 20°C)
  • Minimum sealing pressure: 20 kPa
  • Body material: Glass-reinforced nylon
  • Spring: 316 stainless steel
  • Seat & O-rings: Nitrile rubber
  • Warranty: 20 years
  • Note: Not suitable for acids
  • Country of origin: Australian Made
More Information
Brand Philmac
Fitting Type Valve's
Fitting Size 20mm
Material Poly
UV Rated Yes
Class / Pressure Rating Class 16 (PN16)
↑
Back to Top

PHILMAC ¾" (20MM) FOOT VALVE – FI BSP, PN16, AUSTRALIAN MADE

$32.95